• 0ff559c0801943f77aba6704addd7ecd.jpg
  • 97f09f154a1fd782f15fda26d341d54e.jpg

Анализатор цепей серии 3672A/B/C/D/E

Получить предложение

Сравнить

Арт. 3672A/B/C/D/E Категория: Номер товара в Госреестре:
Сведения из Госреестра СИ, Методики поверки/Описания типа и другие полезные материалы
Ceyear

Анализаторы серии 3672 являются приборами высшего класса и обладают наилучшими характеристиками и широким функционалом в линейке Ceyear.

Утвержденный тип средств измерений, номер в ГРСИ 77566-20

Приборы серии 3672 включают модели:

3672A (10 МГц – 13,5 ГГц)
3672B (10 МГц – 26,5 ГГц)
3672C (10 МГц – 40 ГГц)
3672D (10 МГц – 50 ГГц)
3672E (10 МГц – 67 ГГц)

 

Функциональные возможности :
  • Прямой доступ к передатчикам и приемникам.
  • Сенсорный дисплей высокого разрешения с диагональю 12,1 дюйма.
  • Широкий динамический диапазон.
  • Низкий шум трассы, высокая точность измерения.
  • Измерение полной комплексной S-матрицы, импульсные измерения, измерения во временной области, измерение интермодуляционных искажений, измерения со смещением частоты, измерения устройств с преобразованием частоты (векторные и скалярные), измерение коэффициента шума методом холодного источника, измерение параметров материалов.
  • Однокнопочные измерения.
  • Различные форматы отображения: линейная и логарифмическая шкала амплитуды и фазы, КСВн, диаграмма Смита.
  • Различные варианты калибровки, однопортовая и многопортовая калибровки, возможность использования механических наборов (серийных и пользовательских) и электронных калибраторов.
  • Возможность расширения частоты до 750 ГГц.
  • Различные интерфейсы: VGA, GPIB, USB, LAN и др.
  • Возможность внешня автоматизированных комплексов.
Диапазон частот От

10 МГц

Диапазон частот До

67 ГГц

Дисплей

Экран касания высокого разрешения 12.1 дюймов

Фазовый шум

-90 дБн

Габариты

516мм×280мм×690мм

Импеданc

50Ω

Интерфейс

USB, GPIB, VGA, LAN

Масса (кг)

42, 47, 50

Полоса пропускания

1Hz~5MHz

Разрешение по частоте

1 Гц

Тип соединителя

2,4 мм вилка

Точность

±1×10-7

Выходная мощность

500 Вт

Main Unit

No. Name Description
3672A Vector Network Analyzer 10MHZ ~ 13.5GHZ
3672B Vector Network Analyzer 10MHZ ~ 26.5GHZ
3672C Vector Network Analyzer 10MHZ ~ 40GHZ
3672D Vector Network Analyzer 10MHZ ~ 50GHZ
3672E Vector Network Analyzer 10MHZ ~ 67GHZ

Hardware Options

No. Name Description
3672A-201 2-Port Programmable Step Attenuator Set two 70dB programmable step attenuators for the source path, and two 35dB programmable step attenuators for the receiver path
3672A-400 4-Port Measurement Two-source stimulus four-port VNA configuration
3672A-402 Active Inter-modulation Measurement For inter-modulation signal measurement of amplifier (Option 400 is needed)
3672A-006 English Options Key, Front Panel, Label, Operation System
3672A-008 Pulse Measurement For pulse S-parameter measurement
3672A-401 4-Port Programmable Step Attenuator Set four 70dB programmable step attenuators for the source path, and four 35dB programmable step attenuators for the receiver path (Option 400 is needed)
3672B-201 2-Port Programmable Step Attenuator Set Two 70dB programmable step attenuators for the source path, and two 35dB programmable step attenuators for the receiver path
3672B-400 4-Port Measurement Two-source stimulus four-port VNA configuration
3672B-401 4-Port Programmable Step Attenuator Set four 70dB programmable step attenuators for the source path, and four 35dB programmable step attenuators for the receiver path (Option 400 is needed)
3672B-402 Active Inter-modulation Measurement For inter-modulation signal measurement of amplifier (Option 400 is needed)
3672B-006 English Options Key, Front Panel, Label, Operation System
3672B-008 Pulse Measurement For pulse S-parameter measurement
3672C-201 2-Port Programmable Step Attenuator Set two 60dB programmable step attenuators for the source path, and two 35dB programmable step attenuators for the receiver path
3672C-400 4-Port Measurement Two-source stimulus four-port VNA configuration
3672C-401 4-Port Programmable Step Attenuator Set four 60dB programmable step attenuators for the source path, and four 35dB programmable step attenuators for the receiver path (Option 400 is needed)
3672C-402 Active Inter-modulation Measurement For inter-modulation signal measurement of amplifier (Option 400 is needed)
3672C-006 English Options Key, Front Panel, Label, Operation System
3672C-008 Pulse Measurement For pulse S-parameter measurement
3672D-201 2-Port Programmable Step Attenuator Set two 60dB programmable step attenuators for the source path, and two 35dB programmable step attenuators for the receiver path
3672D-400 4-Port Measurement Two-source stimulus four-port VNA configuration
3672D-401 4-Port Programmable Step Attenuator Set four 60dB programmable step attenuators for the source path, and four 35dB programmable step attenuators for the receiver path (Option 400 is needed)
3672D-006 English Options Key, Front Panel, Label, Operation System
3672D-008 Pulse Measurement For pulse S-parameter measurement
3672E-201 2-Port Programmable Step Attenuator Set two 50dB programmable step attenuators for the source path, and two 50dB programmable step attenuators for the receiver path
3672E-400 4-Port Measurement Two-source stimulus four-port VNA configuration
3672E-401 4-Port Programmable Step Attenuator Set four 50dB programmable step attenuators for the source path, and four 50dB programmable step attenuators for the receiver path (Option 400 is needed)
3672E-402 Active Inter-modulation Measurement For inter-modulation signal measurement of amplifier (Option 400 is needed)
3672E-006 English Options Key, Front Panel, Label, Operation System
3672E-008 Pulse Measurement For pulse S-parameter measurement

Software Options

No. Name Description
3672A-S10 Time Domain Measurement For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables.
3672A-S80 Frequency Offset Measurement For frequency offset measurement. millimeter-wave frequency extension main unit needs this option
3672A-S82 Mixer Scalar Measurement For the scalar parameter measurement of mixers (Option 400 is needed)
3672A-S83 Mixer Vector Measurement For the vector parameter measurement of mixers (Option 400 is needed)
3672A-S84 Embedded LO Frequency Converter Measurement For the measurement of embedded LO frequency converters (Option 400, S82 or S83 are needed)
3672A-S86 Gain Compression Two-Dimension Sweep Measurement For the gain compression two-dimension sweep test of amplifier
3672B-S10 Time Domain Measurement For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables.
3672B-S80 Frequency Offset Measurement For frequency offset measurement. millimeter-wave frequency extension main unit needs this option
3672B-S82 Mixer Scalar Measurement For the scalar parameter measurement of mixers (Option 400 is needed)
3672B-S83 Mixer Vector Measurement For the vector parameter measurement of mixers (Option 400 is needed)
3672B-S84 Embedded LO Frequency Converter Measurement For the measurement of embedded LO frequency converters(Option 400, S82 or S83 are needed)
3672B-S86 Gain Compression Two-Dimension Sweep Measurement For the gain compression two-dimension sweep test of amplifier
3672C-S10 Time Domain Measurement For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables.
3672C-S80 Frequency Offset Measurement For frequency offset measurement. millimeter-wave frequency extension main unit needs this option
3672C-S82 Mixer Scalar Measurement For the scalar parameter measurement of mixers (Option 400 is needed)
3672C-S83 Mixer Vector Measurement For the vector parameter measurement of mixers (Option 400 is needed)
3672C-S84 Embedded LO Frequency Converter Measurement For the measurement of embedded LO frequency converters (Option 400, S82 or S83 are needed)
3672C-S86 Gain Compression Two-Dimension Sweep Measurement For the gain compression two-dimension sweep test of amplifier
3672D-S10 Time Domain Measurement For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables.
3672D-S80 Frequency Offset Measurement For frequency offset measurement. millimeter-wave frequency extension main unit needs this option
3672D-S82 Mixer Scalar Measurement For the scalar parameter measurement of mixers (Option 400 is needed)
3672D-S83 Mixer Vector Measurement For the vector parameter measurement of mixers (Option 400 is needed)
3672D-S84 Embedded LO Frequency Converter Measurement For the measurement of embedded LO frequency converters(Option 400, S82 or S83 are needed)
3672D-S86 Gain Compression Two-Dimension Sweep Measurement For the gain compression two-dimension sweep test of amplifier
3672E-S10 Time-Domain Measurement For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables.
3672E-S80 Frequency Offset Measurement For frequency offset measurement. millimeter-wave frequency extension main unit needs this option
3672E-S82 Mixer Scalar Measurement For the scalar parameter measurement of mixers (Option 400 is needed)
3672E-S83 Mixer Vector Measurement For the vector parameter measurement of mixers (Option 400 is needed)
3672E-S84 Embedded LO Frequency Converter Measurement For the measurement of embedded LO frequency converters(Option 400, S82 or S83 are needed)
3672E-S86 Gain Compression Two-Dimension Sweep Measurement For the gain compression two-dimension sweep test of amplifier

Accessories

No. Name Description
87232 USB Power Probe For 402, S82, S86 Options in the process of power calibration(50MHZ-26.5GHZ)
87233 USB Power Probe For 402, S82, S86 Options in the process of power calibration (50MHz-40GHz)
31121 3.5mm Calibration Kit For calibration of the analyzer
31123 2.4mm Calibration Kit For calibration of the analyzer
31123A 2.4mm Calibration Kit For calibration of the analyzer
20403 E-Cal Kit For calibration of the analyzer (10MHz-26.5GHz, 2 ports)
20404 E-Cal Kit For calibration of the analyzer (10MHz-50GHz 2 ports)
20405 E-Cal Kit For calibration of the analyzer (10MHz-20GHZ, 4 ports)
FB0HA0HB025.0 3.5mm Test cable For measurement of the analyzer
FB0HA0HC025.0 3.5mm Test cable For measurement of the analyzer
FE0BN0BM025.0 2.4mm Test cable For measurement of the analyzer
FE0BN0BL025.0 2.4mm Test cable For measurement of the analyzer
31128 1.85mm Calibration Kit For calibration of the analyzer
20409 E-Cal Kit For calibration of the analyzer (10MHZ-67GHZ, 2 ports)
N4697F/ FF0CN0CM025.0 1.85mm Test cable For measurement of the analyzer

Standard Package

No. Name Description
1 Power Cord Assembly Standard three-prong power cord
2 USB Keyboard/Mouse
3 User Manual
4 Certificate of Conformity
5 Aluminum Alloy Box
2a53ec7fd29a8fd0b092d88aa6fff787 62e2457c2cf51cb47946d6c951ae2814 b22a426a2c4872188aa2392b417e1d7f 172128d680ae8024c35be715470b0485 4075a2f47fcf7de2ef1fbf7c1fdc96cc